Can you retap a keg

So how long does it take to chill down a warm keg? Ready for your mind to be blown? Another cause of foamy beer: too little pressure. If nobody has been pumping the keg at all, the CO2 will break out of the beer and separate. The above searches through our website. Click here to search through our online store. No Comments. Love 0 October 30, Step-by-Step Pictures. STEP 2: Line up the bottom of the tap with the mouth of the keg. Categories What About Beer? Beer Releases and Brewery News Beer-pairing, recipes, and more.

Allagash Brewing Co. Beer Visit Shop Blog Press. Get Social. If they are, beer will spray out as soon as you put the tap on the keg. Seat the party pump on top of the keg, making sure not to push down on the spring-loaded ball valve another way to spray beer in your face.

Lock the pump onto the keg by rotating it clockwise, then engage the tap by pulling the handle out then pushing it down, or by twisting the flanges.

If you see bubbles or foam forming around the tap, something's not seated correctly, so disengage the pump, take it off, and try again. No matter how carefully you've followed these steps, the first glass of beer out of a keg will always be foamy.

Pour foam into a spare glass until beer starts flowing. Foam begets foam, so you'll waste more than you'll drink if you try to pour beer into a foamy glass. Also, you don't have to pump before the first pour, since the keg is already under a great deal of pressure. A pour from a keg that's too fast or slow will create foam. If you plan on using one regularly, you may want to consider purchasing your own keg pump.

Make sure the pump has the right coupler. Most domestic beers use a D-System Sankey coupler. Import beers require a European Style coupler. Not sure what coupler you need? Use our handy-dandy Keg Coupler list to help you choose the right coupler for your keg. It is important to get your keg cold before serving. Chill your keg for hours before tapping to avoid warm and foamy beer. Get a bucket large enough in diameter to hold your keg, and fill the bottom with a layer of ice before placing the keg inside of it.

Continue to fill the bucket to surround the sides of the keg with ice and cover the top. If your bucket is not as tall as your keg, you can place the keg in a garbage bag and put ice in the bag to help keep the top portion of the keg cold. Icing just part of the keg will cause uneven temperatures in your keg and produce foam. Remove any plastic or cardboard from around the tap fixture at the top of the keg.

With the pump handle up this is the off position , line up the coupler lugs with the corresponding openings on the keg valve. While applying downward pressure, turn the tap system clockwise as far as it will go about 90 degrees. Push the pump handle down this is the on position. This allows gas to enter the keg, and the beer to flow out.