Where is ableton library

A sample is a file that contains audio data. Please note that not all of these file formats can be played in the Lite Edition.

As Live plays the samples directly from disk, you can work with a large number of large samples without running into RAM memory limitations. Hard drive rotation speed can also affect disk performance. Refer to the section on managing the disk load see Live can combine uncompressed mono or stereo samples of any length, sample rate or bit depth without prior conversion.

To play a compressed sample, Live decodes the sample and writes the result to a temporary, uncompressed sample file. This usually happens quickly enough that you will be able to play the sample right away, without waiting for the decoding process to finish. Note: When adding a long sample to a project, Live might tell you that it cannot play the sample before it has been analyzed.

Please see the section on analysis see 5. To save computational resources, Live keeps the decoded sample files of compressed samples in the cache. Maintenance of the cache is normally not required, as Live automatically deletes older files to make room for those that are new.

The cache will not grow larger than the Maximum Cache Size setting, and it will always leave the Minimum Free Space on the hard disk. Pressing the nearby Cleanup button will delete all files not being used by the current Live Set. An analysis file is a little file that Live creates when a sample file is brought into the program for the first time.

The analysis file contains data gathered by Live to help optimize the stretching quality, speed up the waveform display and automatically detect the tempo of long samples see 9.

When adding a long sample to a project, Live might tell you that it cannot play the sample before it has been analyzed. This will not happen if the sample has already been analyzed i. The next time the sample is dragged into Live, it will appear with all its clip settings intact. This is particularly useful for retaining Warp Marker settings with the sample. Storing default clip settings with the analysis file is different from saving the clip as a Live Clip.

But if you drag a new version of the sample into a Live Set, Live will use the settings stored in the analysis file for the newly created clip. Live puts this analysis file in the same folder as the sample. Samples that have an. Samples without an. Note that you can suppress the creation of. All data except for the default clip settings can be recreated by Live if the.

The resulting files can be used to burn an audio CD for listening purposes or a data CD, which could serve as a backup of your work or be used with other digital audio applications. Note: video export is not available in the Lite and Intro Editions. You can also upload your exported audio files directly to your SoundCloud account.

But remember — a rendered audio file contains only what you heard prior to rendering. In addition to settings for audio rendering, the Export dialog provides additional options for rendering video:. After the audio rendering is complete, the video will be rendered. Note that, depending on the encoder used, video rendering may occur in more than one pass.

Live will display a progress bar that will indicate the status of the process. The video file will also contain the rendered audio. For more information about working with video in Live, see the chapter on video see Chapter Normally, rendering happens as an offline process. But if your set contains an External Audio Effect see In this case, rendering the master output happens in real time.

Then, any tracks that do access these devices will be rendered in real time. The number of rendering attempts if there has been more than one will also be listed in the dialog box. If you find that dropouts and restarts keep happening, you should close other running applications to allow more processing power for rendering. Please see the chapter on computer audio resources see Chapter 33 for more tips on improving performance.

MIDI files appear with a special icon in the browser. When using the command in the Session View, the file will be inserted in the currently selected clip slot. This command will open a file-save dialog, allowing you to choose the location for your new MIDI file. Individual audio or MIDI clips can be exported to disk in the Live Clip format for easy retrieval and reuse in any project.

Audio clips only contain references to samples on disk rather than the audio data itself , so they are very small, which makes it easy to develop and maintain your own collection.

To save a clip from the open Live Set to disk, simply drag it to the Places section of the browser and drop it into the Current Project or any user folder. You can then type in a new name for the clip or confirm the one suggested by Live with Enter. Note that Live Clips that are imported into tracks already containing devices or clips will appear with their clip settings but not their devices.

You could, for instance, drop a bassline Live Clip on an existing track that drives a bass instrument, rather than creating a new track. Clips belonging to any Live Sets already on disk are also Live Clips. Please see the section on merging Sets see 5. The default clip in the. Live Clips, on the other hand, are stored on disk as separate musical ideas.

For example, you could create a number of variations from the same audio clip by using different warp, pitch, envelope and effect settings, and store them all as separate Live Clips. In the browser, you could then independently sort and preview these clips, even though they are all referring to the same source sample.

The type of document that you create and work on in Live is called a Live Set. In the browser, you can double-click or press Enter on a Live Set to open it. Live makes it easy to merge Sets, which can come in handy when combining work from different versions or pieces. To add all tracks except the return tracks from one Live Set into another, drag the Set from the browser into the current Set, and drop it onto any track title bar or into the drop area next to or below the tracks.

The tracks from the dropped Set will be completely reconstructed, including their clips in the Session and Arrangement View, their devices, and their automation. If you prefer to import individual tracks from a Set, you can unfold the Live Set in the browser just as if it were a folder. You can now drag the individual tracks and drop them as described at the beginning of this section.

Any grooves see Chapter 13 that were saved with your Set are also available as a folder within the unfolded Set.

You can also drag Group Tracks see Group Tracks can be expanded in the browser, allowing you to load an individual track from within. In addition to unfolding Sets, you can further unfold the tracks within the Sets to access the individual Session View clips that were used on the track:. You can browse, preview and import Session View clips from the Set as if they had been stored as individual Live Clips.

This means that any Live Set can serve as a pool of sounds for any other, suggesting creative reuse and crossover. You can export a selection of Session View clips as a new Live Set by dragging them to the browser. Live will use these settings as the initialized, default state for new Live Sets. You can use this to pre-configure:. These Sets will then function as templates: they will load with the configuration you saved, but with the name Untitled.

To view a list of the files referenced by the current Live Set, choose the Manage Files command from the File menu, click the Manage Set button, and then click the View Files button. Live will display one line for each file used by the Live Set. To list all clips or instruments in the Live Set where the file is actually used, click the triangle to expand the line.

Here is what you can do:. A Live Project is a folder containing Live-related files that belong together. Consider, for example, work on a piece of music: You start out with an empty Live Set; you record audio and thereby create new sample files; you drag in samples from collections; you save different versions of the Live Set along the way so that you can go back and compare. When you save a Live Set under a new name or in a new folder location, Live will create a new project folder and store the Live Set there — unless you are saving the Live Set into an existing Live Project.

We have recorded some audio into a new Live Set. The Desktop is available in the browser because we have previously added it as a user folder. Here is the result as displayed by the Live browser:. Next, we record another track into our Project. We save the modified version of the Live Set under a new name so that we do not lose the previous version. As this has nothing to do with our tango dabblings, we decide to save it outside the Tango Project folder, say on the Desktop. Live creates a new project folder named Samba Project next to Tango Project.

So far we have seen how to create Live Projects and save versions of Live Sets into them. How do we open a Project? Simply by opening any of its contained Live Sets. Note that the new project folder has no Samples folder yet. You can prevent this by collecting external files see 5. A note for users of older Live versions : Live does not allow overwriting Live Sets that were created by older major versions to prevent compatibility problems.

Doing this will insure that the newly saved Live Sets reside in project folders. By default, new instrument and effect presets are stored in your current Project. At times however, it may make more sense to save a preset to another folder or to your User Library, so that you can access them from other Projects. You can drag a preset between folders after saving it see When saving presets that contain samples to a new location, Live may copy the samples depending on the settings in the Collect Files on Export chooser in the Library Preferences.

Most of the packs from other providers are packed Live Sets that you can create yourself with Live's File Manager. This file type is created whenever you import an audio file into Ableton Live and it contains specific information about analysed audio data like the warp marker positions, pitch, automatic tempo detection, ensuring the optimal stretching quality and a fast display of the waveform.

When you save clip settings with the Save button under Clip View of a clip, these are stored in the. This kind of file can be used to change the colours of the graphical user interface. So when you choose the Disco skin instead of the Default one, there's an.

This is the file type for all the different rack presets in Ableton Live that you can find in the browser. So if you save a rack, it will be saved as an. Individual device presets have the file ending. Saving any presets yourself also results in an. While the MIDI data is stored within the. Post by Parisien » Sun Aug 17, pm. Post by Hermanus » Mon Aug 18, am. Ableton Forum. Quick links. Where is my user library?